February 17, 2025

DIY Custom Bag Charms

Diy Bag Charms to put on purse

Hey friends! Lately I’ve been obsessed with a new DIY and I’m at the phase of my obsession where I need to share it with everyone. Bag charms are on trend right now and although you can buy ready-made charms online, they can get kinda pricey. Part of the reason I love DIY so much is because along with saving myself some money (well…sometimes, ha!) I also get to customize whatever I’m making exactly how I want it. After following my tutorial you’ll be able to make your own DIY Custom Bag Charms too, so let’s get started.

P.S. You can scroll to the bottom for the YouTube video if you prefer a video format!

The Four Elements of DIY Custom Bag Charms

When it comes to these DIY Custom Bag Charms, each “charm” is its own separate element, so I’ll break down the steps for each element below. After you’ve made all your elements, you combine them onto a key ring or carabiner in however many combinations you’d like.

The four elements of my bag charms are boondoggles, safety pins with beads, a bead stack, and a charm chain. I like this specific combination because I think the contrasting lengths, textures, and materials look really nice together.

DIY Bag Charm Supply List:

Brass Key Ring

Paperclip Chain

Jump Rings

Parachute Cord

Charms

Beads

Heart Safety Pin

Gold Safety Pin

Michaels Paperclip Bracelet

Pilars

Krazy Glue

Shop the full DIY bag charms amazon list here!

YouTube player

Element 1: Boondoggle

Remember making these at summer camp as a kid?! Well they’re back in style and maybe you still know how to make them, but for those who need a refresher you can follow these steps. The beginning is the trickiest part, but once you have that down you can do the rest easily.

  1. Take two pieces of parachute cord and cut them to be equal length. Mine were about ___ inches long. Feed both cord pieces through a jump ring and pull them through about halfway.
  2. Then you will overlay the two pieces so they make an “X” shape. Make sure the part where the two cords cross is inside the jump ring.

3. Now take the bottom piece of cord and pull it up and over. Do the same thing with the other end of that same cord.

4. You should have two separate loops. Hold onto them with one hand using your fingers.

5. Now take one end of the cord you haven’t looped yet and feed it through the “back” loop.

6. Take the other end of that cord and feed it through the other loop.

7. Now pull all the ends to tighten the knot so it looks more like a square. You just made a square knot!

8. To add a charm at any point to your boondoggle, simply slide the charm onto one strand of cord and hold it off to the side while you create your square knot. Keep repeating that process (steps 1-7) over and over, adding charms as you go, until it’s the length you want.

9. Gather all four strands and tie them in a knot to finish the boondoggle. Trim the ends below the knot so they’re even, then use a lighter to burn them a little so they don’t fray.

Tip: I like to space my charms out so they’re not all next to each other or on the same side.

Element 2: Safety Pin Bead Stack

  1. This is the easiest element by far! Simply stack whichever beads you’d like onto your safety pin. I like to use letter beads on this one to spell something out depending on who I’m giving it to, and I like using a mix of small and large beads. Try sticking to one color palette!

2. Attach the jump ring to the safety pin charm when you’re done.

Element 3: Bead Stack

  1. Instead of using parachute cord for the bead stack, I used stretch magic thread. Grab a jump ring and thread some stretch magic through it. Make a loop and knot it at the base of the jump ring.

2. String your bead stack on both strands (you should have two coming off the knot you just made). I used a mix of small beads, chunky beads, and cutesy charms on this stack, but kept the same color palette.

3. When you’re ready to finish your bead strand, add a small bead to the end of the stack. Then string a crimp bead (the tiny metal one) onto the strand right after the small one you just added.

4. Take your jewelry pliers and use them to press down onto the crimp bead, “crimping” it. It should go flat. Now your bead stack is secure! Simply trim the excess stretch magic thread below the crimped bead and you’re done with Element 3 of the DIY Custom Bag Charms!

Element 4: The Charm Chain

  1. For the charm chain, you’ll need an existing chain for your charms. You can find them at any craft store or even your local hardware store! Just look in the chains section! I’m going for a “chunky” look with these, so I chose larger chains.

2. Sometimes you can pull apart the jump ring that comes already attached to the charm with your fingers, but I like to use pliers.

3. Then, slip your charm onto the chain and use the pliers to close that jump ring closed again.

4. Boom, you’ve attached your first charm! Now add a few more, keeping the same theme or color palette. Attach a jump ring to your chain when you’re done.

Finish Your DIY Custom Bag Charm Keychain

  1. Now you’re ready to attach all the elements you made to a keychain or carabiner. I added a couple extra charms directly onto the keychain on some of my bag charms, just because.

And now you’re done!

Please note that some product links are affiliate links and may provide Perkins On Parkway a small commission at no cost to you. Thank you for helping support POP!

Meet Krystle

Welcome to Perkins On Parkway where we share DIY & design projects, renovation tips, lessons learned and the styling that comes after.

Let’s Stay Connected

Join the POP family! Sign up for the Perkins On Parkway newsletter and be the first to receive exclusive behind the scenes content, new posts and special offers.
Thank you for subscribing!

Don't Miss A Thing

Find POP on social media and keep up to date on all of our projects!
chevron-down